Solution Scope
During the transportation and turnover process, records of temperature, location, and unpacking need to be kept. Equipment often experiences obstructions, low temperatures, and disconnections. The project design needs to also answer what tasks the device completes, how often it works, how exceptions are handled, and who receives the data.
Product and Interface Selection
Combined with the transportation time, temperature range, position refresh requirements, data reading method, and box material, choose to collect, control or record the product form.
Power Supply and Operating Strategy
Separate data recording and uploading; change the positioning or broadcast cycle when moving, and enter a bounded retry and cache process when positioning or communication cannot be performed.
Device and Platform Integration
Clarify the data model, connection facilities, parameter configuration, task confirmation and offline business behavior.
Validation and Project Delivery
Write the function, energy consumption and environmental conditions into the test schedule, and deliver the design, procedures and records by product module.
Product Development Services
| Product direction | Business issues and development priorities |
|---|---|
| Low-Power Cold Chain Temperature and Humidity Logger Development | Cold chain transportation needs to record the temperature and read it during handover; record it periodically during transportation and mark when it exceeds the limit; read it in batches during handover or report it in real time as needed. |
| Low-Power GNSS Asset Tracker Development | Turnover boxes and machines need to update their positions when moving; reduce the positioning frequency when stationary, and position according to tasks when moving; retain the status after timeout and wait for the next window. |
| Low-Power Container Monitor Development | The container needs to grasp the opening of the door and changes in the cargo environment; save the associated data when an event occurs, send it when the network is available, and re-transmit it after the connection is restored. |
| Low-Power BLE Asset Tag Development | Warehousing needs to identify the area where pallets and tools are located; use a longer broadcast interval when stationary, switch states when moving or being found, and then restore according to rules. |
Low-Power Cold Chain Temperature and Humidity Logger Development
Low-power cold chain temperature and humidity recorder development services for logistics equipment companies and asset operators. Focusing on the need for cold chain transportation to record temperatures and read them during handover, we develop software and hardware, working status and data interfaces, and verify power consumption and functions according to agreed working conditions.
Explore the ScopeProduct DevelopmentLow-Power GNSS Asset Tracker Development
The low-power GNSS asset locator development service for logistics equipment companies and asset operators focuses on the need to update the location of turnover boxes and machinery when moving, develop software and hardware, working status and data interfaces, and verify power consumption and functions according to agreed working conditions.
Explore the ScopeProduct DevelopmentLow-Power Container Monitor Development
Low-power container status monitoring terminal development services for logistics equipment companies and asset operators. Focusing on the need to grasp container openings and cargo environment changes, we develop software and hardware, working status and data interfaces, and verify power consumption and functions according to agreed working conditions.
Explore the ScopeProduct DevelopmentLow-Power BLE Asset Tag Development
Low-power BLE asset tag development services for logistics equipment companies and asset operators. Focusing on warehousing needs to identify the area where pallets and tools are located, develop software and hardware, working status and data interfaces, and verify power consumption and functions according to agreed working conditions.
Explore the ScopeSystem Architecture and Operation
Separate data recording and uploading; change the positioning or broadcast cycle when moving, and enter a bounded retry and cache process when positioning or communication cannot be performed.
- Device side: Determine the always-on detection, periodic collection and on-demand execution modules according to the target product.
- Connector: Determine the receiving node, gateway or public network link, and define the receiving window and disconnection status.
- Business end: Process records, alarms, configurations and execution acknowledgments according to the customer system.
- Maintenance end: retain power, exception and version information, arrange local maintenance or remote upgrade.
Project Inputs
- Transportation time, temperature range, location refresh requirements, data reading method, and box material.
- Target equipment quantity, installation method, life cycle and on-site environment.
- Hardware, program, platform and protocol information are available.
- Battery or energy constraints, functional delays, and acceptable maintenance practices.
Delivery and Acceptance
| Delivery level | Content and verification focus |
|---|---|
| Product plan | Form product portfolios, interface boundaries, power supply and communication solutions, accounting for on-site infrastructure dependencies. |
| Development and implementation | The hardware or firmware, data interface, parameters and joint debugging records will be delivered according to the selected product. |
| Business verification | Separate data recording and uploading; change the positioning or broadcast cycle when moving, enter the bounded retry and cache process when positioning or communication cannot be performed, and record the corresponding functional behavior and on-site differences. |
| Power consumption and maintenance | Measure typical and abnormal energy consumption in a certain business cycle, check for low battery, loss of connection and recovery, and provide version and maintenance instructions. |
Specialist Engineering Services
Choose module development, system integration or testing services based on product foundation to avoid duplication of existing capabilities.
Battery Power, Charging and State-of-Charge Management
Battery power supply, charging and power management development services, design conversion, charging and protection, determine power estimation and low battery threshold, deliver power circuit, parameter configuration, status interface and load test records. The scope of the project is determined based on the target equipment, existing data and acceptance conditions.
Explore the ScopeSpecialist EngineeringLow-Power Sensor Acquisition Driver Development
Sensor low-power acquisition driver development service, develop single measurement, FIFO, interrupt and power supply control, retain the necessary stabilization time, and deliver driver source code, parameter description, sampling record and exception handling. The scope of the project is determined based on the target equipment, existing data and acceptance conditions.
Explore the ScopeSpecialist EngineeringLow-Power State Machine and Fault Recovery Development
Low-power state machine and exception recovery development services, design failure exit, bounded retry, persistence and restart recovery, delivery of state diagrams, code, configuration and fault injection records. The scope of the project is determined based on the target equipment, existing data and acceptance conditions.
Explore the ScopeSpecialist EngineeringLow-Power BLE Advertising and Connection Development
BLE broadcast and connection low-power development services, configure broadcast and connection parameters according to status, manage synchronization and disconnection recovery, and deliver BLE firmware, protocol fields, parameter tables and target device records. The scope of the project is determined based on the target equipment, existing data and acceptance conditions.
Explore the ScopeSpecialist EngineeringSystem Power, Battery Life and Environmental Validation
Complete machine power consumption, battery life and environmental verification services, measuring state current, event energy, peak voltage drop and long-term business operation, delivering original waveforms, logs, calculation sheets, test reports and coverage. The scope of the project is determined based on the target equipment, existing data and acceptance conditions.
Explore the ScopeSpecialist EngineeringNB-IoT/LTE-M Power Saving Mode Integration
NB-IoT/LTE-M power saving mode adaptation service, requesting and checking power saving parameters, linking sampling reporting and downlink windows, processing mode is unavailable, delivering module configuration, state machine, network log and corresponding current waveform. The scope of the project is determined based on the target equipment, existing data and acceptance conditions.
Explore the ScopeFrequently Asked Questions
Does the cold chain recorder have to be connected to the Internet throughout the entire process?+
You can choose local logging plus handover reading, or reporting when the network is available. Projects that require real-time notification should separately verify coverage, latency and corresponding communication energy consumption.
Does a scenario project have to develop all products simultaneously?+
Select the required products according to business processes. The development of low-power cold chain temperature and humidity recorders and the development of low-power GNSS asset locators can be established separately, and the shared data model or platform interface can be unified in the demand stage.
How do I arrange for advance verification?+
First select representative points and products, check the transportation time, temperature range, location refresh requirements, data reading methods, box materials, verify key power supply, interfaces and business links, and then determine the development scope of the remaining points and equipment.
Online
Phone
WeChat
Top