Engineering Scope
The overall machine power budget and low-power architecture design are used to solve specific engineering problems in low-power projects. The work starts from the customer's existing design and business requirements, allocates energy according to status, and distinguishes typical, peak and abnormal consumption; the power consumption status table, budget calculation table, risk list and test plan are delivered according to the agreed modules.
Check input with baseline
Check the business script, work cycle, response requirements, battery information and current energy consumption, and clarify the scope of measurement and modification.
Implementation and adaptation
Allocate energy according to status, distinguish typical, peak and abnormal consumption, and record solution trade-offs and dependency conditions.
Target environment joint debugging
Use the complete device measurement to correct the budget, check cycle coverage and double counting, and confirm the business behavior after parameter changes.
Document and record delivery
Provide power status sheets, budget calculations, risk lists, and test plans describing versions, builds, or usage methods.
Project Workflow
- Input confirmation: business script, work cycle, response requirements, battery information and current energy consumption.
- Implementation method: Allocate energy according to status and distinguish typical, peak and abnormal consumption.
- Phase review: Use the complete device measurement to correct the budget, and check cycle coverage and double counting.
- Engineering deliverables: Power status sheets, budget calculation sheets, risk lists, and test plans.
Design Conditions and Functional Limits
You can first establish a budget based on device data and clear working assumptions. After the prototype is completed, replace it with measured data item by item, and indicate the difference between estimation and measurement.
Special services take the agreed module as the implementation boundary. When hardware modifications, third-party agreements, overall platforms or external tests are involved, the interfaces, workload and responsibilities are confirmed separately, and local modifications are not directly used as conclusions on the performance of the complete device.
Project Inputs
- Business scripts, work cycles, response requirements, battery information and current energy consumption.
- Existing prototypes and reproducible problems, or new project functionality and power consumption targets.
- Modified design, source code and third-party dependencies are allowed; functionality and compatibility need to be maintained.
- Delivery list, target environment, sample scope, project milestones and acceptance methods.
Delivery and Acceptance
| Delivery content | Check method |
|---|---|
| Power status sheets, budget calculation sheets, risk lists and test plans | Check the editability, version, usage instructions and dependencies by file list. |
| Implementation verification | Use the complete device measurement to correct the budget, check cycle coverage and repeated counting, and retain the corresponding working conditions and results. |
| Comparison of functions and power consumption | Fixed applicable hardware, software, battery, temperature and business cycles, accounting for changes in conditions and their impact. |
| Reproduction and follow-up maintenance | Provide build or run steps, known limitations, parameter ranges, and uncovered cases. |
Frequently Asked Questions
Can I make a budget first if I don’t have a prototype?+
You can first establish a budget based on device data and clear working assumptions. After the prototype is completed, replace it with measured data item by item, and indicate the difference between estimation and measurement.
What information do I need to prepare before starting the project?+
This work focuses on business scripts, work cycles, response requirements, battery information and current energy consumption. When the data is incomplete, first determine the scope that needs supplementary testing or sorting out, and then proceed to implementation.
Can it be implemented together with the complete device development project?+
It can be used as a work package in the overall project, or it can be implemented separately for existing products. It is necessary to explain the interfaces with other modules, versions and final machine verification responsibilities.
Engineering References
The configuration of GPIO should be checked together with the external circuit, sleep mode and wake-up status; the actual parameters are subject to the target chip data and the whole board test. GPIO and power state design reference
Online
Phone
WeChat
Top