Engineering Scope
The low-power wireless help button is developed to meet the usage requirement of "personnel needing to proactively send for help with them or at a fixed location". Collection, processing, communication and power supply are designed as one set of products. The project can start from new main board development, existing firmware modification or designated module integration. The development scope is confirmed based on the target function, existing foundation and delivery requirements.
Interfaces and Product Integration
Develop key wake-up, identity binding, sending confirmation, bounded retry, feedback prompts and battery self-test.
Power Supply and State Scheduling
Press the key to wake up and send the event, wait for confirmation and prompt, and give a failure status after reaching the retry boundary.
Data and System Integration
Clear connections and data formats around buttons, feedback lights or vibrations, wireless communication and battery detection, and define recording, transmission, confirmation and abnormal status.
Prototypes, Testing and Deliverables
Form a button state machine, confirmation protocol, feedback program and transmission delay record, focusing on verifying the event transmission rate, response time, loss of contact prompts and periodic self-test energy; separate system requirements will be determined for emergency purposes.
System Architecture and Operation
Press the key to wake up and send the event, wait for confirmation and prompt, and give a failure status after reaching the retry boundary.
- Interface composition: buttons, feedback light or vibration, wireless communication and battery detection.
- Work scheduling: Determine each status based on sampling, interaction and reception requirements, indicating which circuits continue to run.
- Exception handling: Define deadlines, bounded retries, and recovery behaviors for applicable communication, sensing, or execution tasks.
Design Conditions and Functional Limits
Communication coverage, system redundancy and disposal requirements for emergency purposes will be agreed separately.
Define power targets together with functional requirements. Battery-life estimates must specify the battery, temperature, operating cycle, event frequency and network conditions. Keep estimates separate from continuous-operation test results.
Project Inputs
| Data category | Startup data |
|---|---|
| business work cycle | Personnel need to take the initiative to ask for help on the go or at a fixed location; provide typical usage procedures, sampling and upload times, target battery life and response requirements. |
| Product interface and structure | Buttons, feedback lights or vibrations, wireless communication and battery detection; for existing products, provide schematics, a bill of materials (BOM), firmware and prototypes. |
| Batteries and site conditions | Provide battery model, power supply range, cut-off voltage, temperature, installation method and communication conditions. |
| Delivery and Responsibility | Clarify the scope of source code and design files, platform docking, number of prototypes, test conditions and third-party work. |
Delivery and Acceptance
| Delivery project | Verification method |
|---|---|
| Design and implementation | Button state machine, confirmation protocol, feedback program and transmission delay record; hardware, source code and third-party component scope are clearly stated in the statement of work. |
| Functional verification | Press the key to wake up and send an event, wait for confirmation and prompt, and give a failure status after reaching the retry boundary; record the input, output and recovery results of each status. |
| Power consumption verification | Event transmission rate, response time, loss of contact reminder and periodic self-check energy; emergency use requires separate system requirements. Fix the battery side measurement point to record the energy from the full task cycle until the device returns to sleep. |
| Exceptions and retesting | Covers applicable situations such as low battery, continuous triggering, loss of connection or restart, and retains original logs, waveforms and versions. |
Specialist Engineering Services
Select the required modules based on the existing product. Interfaces and responsibilities are defined in the project scope.
MCU Sleep and Wake-Up Firmware Development
MCU Sleep wake-up firmware development service, develops sleep entry conditions, wake-up determination, clock recovery and driver reconstruction, and delivers state machine, firmware, wake-up timing and function regression records. The scope of the project is determined based on the target equipment, existing data and acceptance conditions.
Explore the ScopeSpecialist EngineeringLow-Power State Machine and Fault Recovery Development
Low-power state machine and exception recovery development services, design failure exit, bounded retry, persistence and restart recovery, delivery of state diagrams, code, configuration and fault injection records. The scope of the project is determined based on the target equipment, existing data and acceptance conditions.
Explore the ScopeSpecialist EngineeringLow-Power BLE Advertising and Connection Development
BLE broadcast and connection low-power development services, configure broadcast and connection parameters according to status, manage synchronization and disconnection recovery, and deliver BLE firmware, protocol fields, parameter tables and target device records. The scope of the project is determined based on the target equipment, existing data and acceptance conditions.
Explore the ScopeSpecialist EngineeringManagement Platforms and Clients for Sleeping Devices
The dormant device management platform and client development services manage sleep status, command queue, expiration processing, power trends and execution acknowledgments, and deliver device models, server and client code, API and joint debugging records. The scope of the project is determined based on the target equipment, existing data and acceptance conditions.
Explore the ScopeSpecialist EngineeringSystem Power, Battery Life and Environmental Validation
Complete machine power consumption, battery life and environmental verification services, measuring state current, event energy, peak voltage drop and long-term business operation, delivering original waveforms, logs, calculation sheets, test reports and coverage. The scope of the project is determined based on the target equipment, existing data and acceptance conditions.
Explore the ScopeFrequently Asked Questions
Does the indicator light on the button mean that the notification is successful?+
It should respectively indicate that the local machine has been triggered, the peer has received and the business has been processed. The feedback level should be selected according to the project, and the packet loss and gateway offline situations should be covered.
Is it possible to develop only part of an existing product?+
Module development or power consumption optimization can be carried out according to the existing interface and modifiable range. For this product, you first need to check the buttons, feedback lights or vibrations, wireless communication and battery detection, and then determine the scope of changes and regression.
How to determine the cost and period of this project?+
The evaluation is split based on deliverables such as button state machines, confirmation protocols, feedback procedures, and transmission delay records; the prototype materials, structure, platform, external tests, and new functions are listed separately, and quotations and nodes are formed after the requirements and interfaces are confirmed.
Engineering References
The configuration of GPIO should be checked together with the external circuit, sleep mode and wake-up status; the actual parameters are subject to the target chip data and the whole board test. GPIO and power state design reference
Online
Phone
WeChat
Top