Solution Scope
Loads such as detection, identification, transmission, and motors need to be retained during standby and started according to events. The project design needs to also answer what tasks the device completes, how often it works, how exceptions are handled, and who receives the data.
Product and Interface Selection
Combined with the lock body or detector, motor load, wake-up source, permission interface, emergency and loss of contact requirements, select the collection, control or recording product form.
Power Supply and Operating Strategy
Retain necessary detection links, enable identification and execution modules in sections, and verify low voltage, blocked rotor, continuous triggering and event confirmation.
Device and Platform Integration
Clarify the data model, connection facilities, parameter configuration, task confirmation and offline business behavior.
Validation and Project Delivery
Write the function, energy consumption and environmental conditions into the test schedule, and deliver the design, procedures and records by product module.
Product Development Services
| Product direction | Business issues and development priorities |
|---|---|
| Low-Power Smart Lock Control Board Development | Battery door locks need to reduce standby and recognition power consumption; start recognition after detecting input, drive after authorization is passed, and shut down non-essential loads after reading the lock status. |
| Low-Power Wireless Infrared Detector Development | No wiring points need to monitor personnel movement events; retain the front-end detection, wake up the main controller and send notifications after the event is valid, and then resume according to the retention rules. |
| Low-Power Wireless Assistance Button Development | Personnel need to take the initiative to ask for help at hand or at a fixed location; press a button to wake up and send an event, wait for confirmation and prompt, and give a failure status after reaching the retry boundary. |
| Low-Power Electronic Security Seal Development | Transportation seals need to record disassembly and authorized unlocking; continuously check necessary inputs, save time when events occur, report and record receipts after being connected to the Internet. |
Low-Power Smart Lock Control Board Development
Low-power smart door lock control board development services for door lock manufacturers and security equipment companies. Focusing on the need to reduce standby and identification power consumption of battery door locks, we develop software and hardware, working status and data interfaces, and verify power consumption and functions according to agreed working conditions.
Explore the ScopeProduct DevelopmentLow-Power Wireless Infrared Detector Development
Low-power wireless infrared detector development services for door lock manufacturers and security equipment companies, focusing on the need to monitor human movement events at non-wiring points, develop software and hardware, working status and data interfaces, and verify power consumption and functions according to agreed working conditions.
Explore the ScopeProduct DevelopmentLow-Power Wireless Assistance Button Development
Low-power wireless help button development services for door lock manufacturers and security equipment companies, which proactively send help for people's needs on the go or at a fixed location, develop software and hardware, working status and data interfaces, and verify power consumption and functions according to agreed working conditions.
Explore the ScopeProduct DevelopmentLow-Power Electronic Security Seal Development
Low-power electronic seal development services for door lock manufacturers and security equipment companies, focusing on the need to record disassembly and authorized unlocking of transportation seals, develop software and hardware, working status and data interfaces, and verify power consumption and functions according to agreed working conditions.
Explore the ScopeSystem Architecture and Operation
Retain necessary detection links, enable identification and execution modules in sections, and verify low voltage, blocked rotor, continuous triggering and event confirmation.
- Device side: Determine the always-on detection, periodic collection and on-demand execution modules according to the target product.
- Connector: Determine the receiving node, gateway or public network link, and define the receiving window and disconnection status.
- Business end: Process records, alarms, configurations and execution acknowledgments according to the customer system.
- Maintenance end: retain power, exception and version information, arrange local maintenance or remote upgrade.
Project Inputs
- Lock body or detector, motor load, wake-up source, authority interface, emergency and loss of contact requirements.
- Target equipment quantity, installation method, life cycle and on-site environment.
- Hardware, program, platform and protocol information are available.
- Battery or energy constraints, functional delays, and acceptable maintenance practices.
Delivery and Acceptance
| Delivery level | Content and verification focus |
|---|---|
| Product plan | Form product portfolios, interface boundaries, power supply and communication solutions, accounting for on-site infrastructure dependencies. |
| Development and implementation | The hardware or firmware, data interface, parameters and joint debugging records will be delivered according to the selected product. |
| Business verification | Retain necessary detection links, enable identification and execution modules in segments, verify low voltage, blocked rotor, continuous triggering and event confirmation, and record corresponding functional behaviors and on-site differences. |
| Power consumption and maintenance | Measure typical and abnormal energy consumption in a certain business cycle, check for low battery, loss of connection and recovery, and provide version and maintenance instructions. |
Specialist Engineering Services
Choose module development, system integration or testing services based on product foundation to avoid duplication of existing capabilities.
Low-Leakage Hardware and PCB Development
Low-leakage hardware and PCB development services, checking static paths, protection devices, level translation and device quiescent current, delivering schematics, PCB source files, BOM, manufacturing files and node current records. The scope of the project is determined based on the target equipment, existing data and acceptance conditions.
Explore the ScopeSpecialist EngineeringPower Domain and Peripheral Power-Gating Development
Multi-power domain and peripheral power-off control development services, split power domains, design switches, signal isolation and recovery timing, and deliver power trees, timing diagrams, switching circuits, drive and shutdown test records. The scope of the project is determined based on the target equipment, existing data and acceptance conditions.
Explore the ScopeSpecialist EngineeringBattery Power, Charging and State-of-Charge Management
Battery power supply, charging and power management development services, design conversion, charging and protection, determine power estimation and low battery threshold, deliver power circuit, parameter configuration, status interface and load test records. The scope of the project is determined based on the target equipment, existing data and acceptance conditions.
Explore the ScopeSpecialist EngineeringLow-Power Display and Actuator Control
Display and actuator low-power control development services, control refresh, backlight, motor or valve timing, handle execution failures and power surges, deliver driver code, circuit modifications, parameters and single-action energy records. The scope of the project is determined based on the target equipment, existing data and acceptance conditions.
Explore the ScopeSpecialist EngineeringSystem Power, Battery Life and Environmental Validation
Complete machine power consumption, battery life and environmental verification services, measuring state current, event energy, peak voltage drop and long-term business operation, delivering original waveforms, logs, calculation sheets, test reports and coverage. The scope of the project is determined based on the target equipment, existing data and acceptance conditions.
Explore the ScopeSpecialist EngineeringMCU Sleep and Wake-Up Firmware Development
MCU Sleep wake-up firmware development service, develops sleep entry conditions, wake-up determination, clock recovery and driver reconstruction, and delivers state machine, firmware, wake-up timing and function regression records. The scope of the project is determined based on the target equipment, existing data and acceptance conditions.
Explore the ScopeFrequently Asked Questions
Can reducing power consumption directly reduce the number of detections and alarms?+
The detection range and alarm requirements are product functional constraints. Optimization should first eliminate leakage and unnecessary wake-ups; adjusting the detection cycle or retry strategy requires confirming the business impact.
Does a scenario project have to develop all products simultaneously?+
Select the required products according to business processes. The development of low-power smart door lock control boards and the development of low-power wireless infrared detectors can be established separately, and the shared data model or platform interface can be unified in the demand stage.
How do I arrange for advance verification?+
First select representative points and products, check the lock body or detector, motor load, wake-up source, authority interface, emergency and loss of contact requirements, verify the key power supply, interfaces and business links, and then determine the development scope of the remaining points and equipment.
Online
Phone
WeChat
Top