Solution Scope
The installation location is inconvenient for power supply and battery replacement, so solar energy, indoor light, NFC field sources or vibration energy need to be evaluated. The project design needs to also answer what tasks the device completes, how often it works, how exceptions are handled, and who receives the data.
Product and Interface Selection
Combined with the installation location energy record, load cycle, energy storage space, energy-free duration, reader or transducer, select the collection, control or recording product form.
Power Supply and Operating Strategy
Measure the energy first and then design the load, verify cold start, energy storage and no-energy periods respectively; arrange collection and communication according to the remaining energy.
Device and Platform Integration
Clarify the data model, connection facilities, parameter configuration, task confirmation and offline business behavior.
Validation and Project Delivery
Write the function, energy consumption and environmental conditions into the test schedule, and deliver the design, procedures and records by product module.
Product Development Services
| Product direction | Business issues and development priorities |
|---|---|
| Solar-Powered Low-Power Telemetry Device Development | Existing instruments in the field need solar power for collection and uploading; start instrument collection according to the energy budget, upload in batches, and perform agreed downgrade tasks when energy is insufficient. |
| Indoor Photovoltaic Low-Power Sensor Node Development | Indoor measuring points cannot be wired and are inconvenient to replace electricity; collect energy and wait for the energy storage to reach the threshold, and then accumulate energy after completing a measurement and communication. |
| NFC Batteryless Sensor Tag Development | The enclosed equipment needs to read the status on demand at a close distance; after entering the reader field, the power supply is established, the energy conditions are met, then the sample is sampled and the reading results are provided. |
| Vibration Energy Harvesting Sensor Node Development | There is vibration energy next to the operating equipment, and the measurement points are difficult to maintain; energy is obtained when the target equipment is running, collected and reported after the energy storage reaches the working threshold, and the task is retained according to the policy during shutdown. |
Solar-Powered Low-Power Telemetry Device Development
Solar low-power telemetry collector development services for packaged sensor companies and equipment integrators without mains power. Focusing on the solar power collection and uploading of existing instruments in the field, we develop software and hardware, working status and data interfaces, and verify power consumption and functions according to agreed working conditions.
Explore the ScopeProduct DevelopmentIndoor Photovoltaic Low-Power Sensor Node Development
Indoor photovoltaic low-power sensing node development services for packaged sensor companies and equipment integrators without mains power. We develop software and hardware, working status and data interfaces based on indoor measurement points that cannot be wired and are inconvenient to replace power, and verify power consumption and functions according to agreed working conditions.
Explore the ScopeProduct DevelopmentNFC Batteryless Sensor Tag Development
The NFC battery-less sensing tag development service is aimed at packaged sensor companies and unmaintained equipment integrators. It focuses on the need to read the status of packaged equipment at close range and on-demand, develop software and hardware, working status and data interfaces, and verify power consumption and functions according to agreed working conditions.
Explore the ScopeProduct DevelopmentVibration Energy Harvesting Sensor Node Development
Vibration energy collection and monitoring node development services for packaged sensor companies and equipment integrators without mains power. Focusing on vibration energy next to operating equipment and difficult maintenance of measurement points, we develop software and hardware, working status and data interfaces, and verify power consumption and functions according to agreed working conditions.
Explore the ScopeSystem Architecture and Operation
Measure the energy first and then design the load, verify cold start, energy storage and no-energy periods respectively; arrange collection and communication according to the remaining energy.
- Device side: Determine the always-on detection, periodic collection and on-demand execution modules according to the target product.
- Connector: Determine the receiving node, gateway or public network link, and define the receiving window and disconnection status.
- Business end: Process records, alarms, configurations and execution acknowledgments according to the customer system.
- Maintenance end: retain power, exception and version information, arrange local maintenance or remote upgrade.
Project Inputs
- Energy recording at the installation location, load cycles, energy storage space, energy-free duration, readers or transducers.
- Target equipment quantity, installation method, life cycle and on-site environment.
- Hardware, program, platform and protocol information are available.
- Battery or energy constraints, functional delays, and acceptable maintenance practices.
Delivery and Acceptance
| Delivery level | Content and verification focus |
|---|---|
| Product plan | Form product portfolios, interface boundaries, power supply and communication solutions, accounting for on-site infrastructure dependencies. |
| Development and implementation | The hardware or firmware, data interface, parameters and joint debugging records will be delivered according to the selected product. |
| Business verification | Measure the energy first and then design the load, and verify the cold start, energy storage and no-energy periods respectively; arrange collection and communication according to the remaining energy, and record the corresponding functional behavior and on-site differences. |
| Power consumption and maintenance | Measure typical and abnormal energy consumption in a certain business cycle, check for low battery, loss of connection and recovery, and provide version and maintenance instructions. |
Specialist Engineering Services
Choose module development, system integration or testing services based on product foundation to avoid duplication of existing capabilities.
System Power Budget and Low-Power Architecture Design
Complete machine power budget and low-power architecture design services, allocate energy according to status, distinguish typical, peak and abnormal consumption, and deliver power consumption status tables, budget calculation tables, risk lists and test plans. The scope of the project is determined based on the target equipment, existing data and acceptance conditions.
Explore the ScopeSpecialist EngineeringPower Domain and Peripheral Power-Gating Development
Multi-power domain and peripheral power-off control development services, split power domains, design switches, signal isolation and recovery timing, and deliver power trees, timing diagrams, switching circuits, drive and shutdown test records. The scope of the project is determined based on the target equipment, existing data and acceptance conditions.
Explore the ScopeSpecialist EngineeringBattery Power, Charging and State-of-Charge Management
Battery power supply, charging and power management development services, design conversion, charging and protection, determine power estimation and low battery threshold, deliver power circuit, parameter configuration, status interface and load test records. The scope of the project is determined based on the target equipment, existing data and acceptance conditions.
Explore the ScopeSpecialist EngineeringSolar and Energy Harvesting Power Supply Development
Solar energy and energy collection power supply development services, input measurement, cold start verification, energy storage threshold design and task scheduling, delivery of feasibility conclusions, energy balance sheets, circuit prototypes and operation records. The scope of the project is determined based on the target equipment, existing data and acceptance conditions.
Explore the ScopeSpecialist EngineeringSystem Power, Battery Life and Environmental Validation
Complete machine power consumption, battery life and environmental verification services, measuring state current, event energy, peak voltage drop and long-term business operation, delivering original waveforms, logs, calculation sheets, test reports and coverage. The scope of the project is determined based on the target equipment, existing data and acceptance conditions.
Explore the ScopeSpecialist EngineeringLow-Power Sensor Acquisition Driver Development
Sensor low-power acquisition driver development service, develop single measurement, FIFO, interrupt and power supply control, retain the necessary stabilization time, and deliver driver source code, parameter description, sampling record and exception handling. The scope of the project is determined based on the target equipment, existing data and acceptance conditions.
Explore the ScopeFrequently Asked Questions
How to determine whether an energy harvesting project can enter product development?+
The available inputs are first measured in a representative environment and compared with cold start, conversion losses and load energy. When requirements are not met, functions, energy storage or energy solutions need to be adjusted.
Does a scenario project have to develop all products simultaneously?+
Select the required products according to business processes. The development of solar low-power telemetry collectors and the development of indoor photovoltaic low-power sensing nodes can be established separately, and the shared data model or platform interface can be unified in the demand stage.
How do I arrange for advance verification?+
First select representative points and products, check the installation location energy records, load cycles, energy storage space, energy-free duration, readers or transducers, verify key power supply, interfaces and business links, and then determine the development scope of the remaining points and equipment.
Online
Phone
WeChat
Top