Solution Scope
The equipment measuring points are scattered and the wiring is inconvenient. It is necessary to keep status records while reducing power replacement and maintenance. The project design needs to also answer what tasks the device completes, how often it works, how exceptions are handled, and who receives the data.
Product and Interface Selection
Combined with equipment status signals, sensor installation locations, sampling bandwidth, and maintenance cycles, the product form can be selected to collect, control, or record.
Power Supply and Operating Strategy
First divide continuous detection and periodic measurement, and then arrange local processing and data upload; focus on checking probe startup, motor interference and on-site wireless conditions.
Device and Platform Integration
Clarify the data model, connection facilities, parameter configuration, task confirmation and offline business behavior.
Validation and Project Delivery
Write the function, energy consumption and environmental conditions into the test schedule, and deliver the design, procedures and records by product module.
Product Development Services
| Product direction | Business issues and development priorities |
|---|---|
| Low-Power Wireless Temperature Logger Development | Decentralized temperature measurement is required on bearings, cabinets and equipment surfaces; probes are activated periodically and sampling is done after waiting for stability; events are recorded when the temperature exceeds the limit and reported as configured. |
| Low-Power Wireless Pressure Monitor Development | There is no nearby power supply at the pipeline and gas line pressure measuring points; turn on the excitation and front-end, complete stabilization and conversion, and cache and send after judging that the limit is exceeded. |
| Low-Power Wireless Vibration Sensor Node Development | Motors and fans need to obtain vibration status periodically; continuously collect a window during an agreed period, extract features, save event waveforms, and upload them in batches. |
| Low-Power Equipment Runtime Recorder Development | Non-networked equipment needs to record startup, shutdown and running time; status edge triggers timing, periodically checks status, and settles and saves working hours after shutdown. |
Low-Power Wireless Temperature Logger Development
Low-power wireless temperature collector development services for equipment manufacturers and factory operation and maintenance teams. Focusing on the need for decentralized temperature measurement on bearings, cabinets and equipment surfaces, we develop software and hardware, working status and data interfaces, and verify power consumption and functions according to agreed working conditions.
Explore the ScopeProduct DevelopmentLow-Power Wireless Pressure Monitor Development
Low-power wireless pressure monitoring terminal development services for equipment manufacturers and factory operation and maintenance teams. We develop software and hardware, working status and data interfaces around pipeline and gas line pressure measurement points without nearby power sources, and verify power consumption and functions according to agreed working conditions.
Explore the ScopeProduct DevelopmentLow-Power Wireless Vibration Sensor Node Development
Low-power wireless vibration monitoring node development services for equipment manufacturers and factory operation and maintenance teams. We develop software and hardware, working status and data interfaces based on the needs of motors and fans to periodically obtain vibration status, and verify power consumption and functions according to agreed working conditions.
Explore the ScopeProduct DevelopmentLow-Power Equipment Runtime Recorder Development
Low-power equipment operation timing terminal development services for equipment manufacturers and factory operation and maintenance teams. Focusing on the need to record startup, shutdown and running time of non-networked equipment, we develop software and hardware, working status and data interfaces, and verify power consumption and functions according to agreed working conditions.
Explore the ScopeSystem Architecture and Operation
First divide continuous detection and periodic measurement, and then arrange local processing and data upload; focus on checking probe startup, motor interference and on-site wireless conditions.
- Device side: Determine the always-on detection, periodic collection and on-demand execution modules according to the target product.
- Connector: Determine the receiving node, gateway or public network link, and define the receiving window and disconnection status.
- Business end: Process records, alarms, configurations and execution acknowledgments according to the customer system.
- Maintenance end: retain power, exception and version information, arrange local maintenance or remote upgrade.
Project Inputs
- Equipment status signal, sensor installation location, sampling bandwidth, maintenance cycle.
- Target equipment quantity, installation method, life cycle and on-site environment.
- Hardware, program, platform and protocol information are available.
- Battery or energy constraints, functional delays, and acceptable maintenance practices.
Delivery and Acceptance
| Delivery level | Content and verification focus |
|---|---|
| Product plan | Form product portfolios, interface boundaries, power supply and communication solutions, accounting for on-site infrastructure dependencies. |
| Development and implementation | The hardware or firmware, data interface, parameters and joint debugging records will be delivered according to the selected product. |
| Business verification | First divide continuous detection and periodic measurement, and then arrange local processing and data upload; focus on checking probe startup, motor interference and on-site wireless conditions, and record corresponding functional behaviors and on-site differences. |
| Power consumption and maintenance | Measure typical and abnormal energy consumption in a certain business cycle, check for low battery, loss of connection and recovery, and provide version and maintenance instructions. |
Specialist Engineering Services
Choose module development, system integration or testing services based on product foundation to avoid duplication of existing capabilities.
Power Domain and Peripheral Power-Gating Development
Multi-power domain and peripheral power-off control development services, split power domains, design switches, signal isolation and recovery timing, and deliver power trees, timing diagrams, switching circuits, drive and shutdown test records. The scope of the project is determined based on the target equipment, existing data and acceptance conditions.
Explore the ScopeSpecialist EngineeringMCU Sleep and Wake-Up Firmware Development
MCU Sleep wake-up firmware development service, develops sleep entry conditions, wake-up determination, clock recovery and driver reconstruction, and delivers state machine, firmware, wake-up timing and function regression records. The scope of the project is determined based on the target equipment, existing data and acceptance conditions.
Explore the ScopeSpecialist EngineeringLow-Power Sensor Acquisition Driver Development
Sensor low-power acquisition driver development service, develop single measurement, FIFO, interrupt and power supply control, retain the necessary stabilization time, and deliver driver source code, parameter description, sampling record and exception handling. The scope of the project is determined based on the target equipment, existing data and acceptance conditions.
Explore the ScopeSpecialist EngineeringLow-Power BLE Advertising and Connection Development
BLE broadcast and connection low-power development services, configure broadcast and connection parameters according to status, manage synchronization and disconnection recovery, and deliver BLE firmware, protocol fields, parameter tables and target device records. The scope of the project is determined based on the target equipment, existing data and acceptance conditions.
Explore the ScopeSpecialist EngineeringSystem Power, Battery Life and Environmental Validation
Complete machine power consumption, battery life and environmental verification services, measuring state current, event energy, peak voltage drop and long-term business operation, delivering original waveforms, logs, calculation sheets, test reports and coverage. The scope of the project is determined based on the target equipment, existing data and acceptance conditions.
Explore the ScopeSpecialist EngineeringLow-Leakage Hardware and PCB Development
Low-leakage hardware and PCB development services, checking static paths, protection devices, level translation and device quiescent current, delivering schematics, PCB source files, BOM, manufacturing files and node current records. The scope of the project is determined based on the target equipment, existing data and acceptance conditions.
Explore the ScopeFrequently Asked Questions
Do you need to continuously collect raw vibration waveforms?+
Periodic waveforms, event segments or feature reporting can be selected according to the diagnosis target. The sampling bandwidth and window length should be determined first, and reduced sampling cannot be used to cover up missed events.
Does a scenario project have to develop all products simultaneously?+
Select the required products according to business processes. The development of low-power wireless temperature collectors and the development of low-power wireless pressure monitoring terminals can be established separately, and the shared data model or platform interface can be unified in the demand stage.
How do I arrange for advance verification?+
First select representative points and products, check equipment status signals, sensor installation locations, sampling bandwidth, maintenance cycles, verify key power supplies, interfaces and business links, and then determine the development scope of the remaining points and equipment.
Online
Phone
WeChat
Top